Is the loading frame for the tips autoclavable?

Yes, the loading frame is autoclavable at 121 °C and 1 bar overpressure for 20 minutes. Remember to not autoclave the tips!

What can I do to prevent the O-rings of the epMotion 96 from erosion?

To protect the O-rings of the epMotion 96 from erosion we recommend to lubricate them with a thin layer of silicone spray.

Does a chemical resistance sheet for the epMotion 96 exist?

Yes you may download a chemical resistance sheet from the homepage.

How can I pipet 1 µL with the epMotion 96?

For transferring 1 µL with the epMotion 96 we recommend to use the "small volume" mode.

How can I transfer viscous liquids with the epMotion 96?

We recommend a very low aspiration and dispensing speed (1-3) when working with viscous liquids and the mode "Reverse pipetting". More information are available in White paper 39 .

Is it possible to dispens liquids in free-jet with the epMotion 96?

No, the epMotion 96 should not be used with free-jet dispensing. It is recommended to dispens directly into liquid.

How can I transfer volatile liquids (ethanol) with the epMotion 96 without drop formation on the tips?

We recommend to pre-wet the tips of the epMotion 96 via 2-3 aspration and dispensing cycles to avoid drop formation on the tips. Furthermore a low speed level (1-5) is advantageous. More information are available in White paper 39 .

Is the adapter for 384 well plates autoclavable?

Yes, the adapter for 384 well plates is autoclavable at 121 °C and 1 bar overpressure for 20 minutes.

How do I multidispense small volumes of 1-5 µL?

When dispensing small volumes of 1-5 µL some points have to be considered: 1) Use 50 µL tips 2) Always dispense into liquid or on a liquid surface 3) Use speed 9 for dispensing 4) Immerse the tip 2-3 mm into the liquid, press dispense and slowly remove the tip from the liquid

A pop-up window asks me to perform a firmware update after I staretd my iPod. How can I perform the firmware update?

Performing the firmware update is mandatory when the pop-up window showed, otherwise accurate pipetting and multiple functions on the epMotion96 and 96xl are not available. A firmware update is easily done by following the steps in short protocol 27 "How to perform a firmware update on epMotion 96 and epMotion 96xl".

Is it possible to use 10 µL epT.I.P.S. motion reloads with epMotion 96?

No, it is impossible to use the 10 µL epT.I.P.S. motion reloads with epMotion 96.

Who is my local service contact?

Please contact your local Eppendorf Service Team. You find the contact data on our homepage ( www.eppendorf.com ) or in the information materials.

Which consumables should be replaced at regular intervals?

All three XYZ flex cables should be replaced at least once per year if the machine is used daily.

What types of service programs are available for ep Motion ?

各器機に提供されているサービスプログラムは、サービス＆サポート/メンテナンスおよび証明書サービスセクションにあります。

What do you need to look out for before carrying out a service?

The device needs to be decontaminated first. The device must be freely accessible and all samples removed from the device.

How much are the different ep Motion service programs?

The costs depend on the model and service that is performed. Please contact your local Eppendorf Service.

Why do the dispensing tools of my ep Motion need to be calibrated?

The dispensing tools are precision devices. Servicing and calibration at regular intervals ensure a consistently high precision of the results. We provide documentation in support for GLP to assist you.

How often does my ep Motion need to be serviced?

The need for service depends on how intensively the device is used and if you are working in a regulated field with special service demands. However, we recommend to have it serviced at least once a year.

What types of training or online training do you offer to enable me to improve my skills?

Please visit the Eppendorf webpage about the Eppendorf Training Center ( https://www.eppendorf.com/training or contact your local Eppendorf Service for further information and a quotation.

How often do dispensing tools need to be calibrated?

As part of his test equipment monitoring process, the operator determines the frequency of the calibration as well as the quantity of the testing volume and the number of measurements for each testing volume. This may vary depending on how often the device is used, by how many operators it is used, the aggressivity of the liquids used and the maximum permissible errors defined by the operator. The dispensing tools of your device will display after 200,000 runs that an inspection is recommended. However, there should be at least 1 calibration per year.

What is IQ or OQ and what do I need them for?

Installation and operational qualification; the IQ documents that the device has been delivered and installed correctly. The OQ checks the correct functioning of a device. IQ/OQ ensure that your quality management requirements are met and that your device operates properly and in accordance with the manufacturer’s specifications.

Does a service carried out by Eppendorf meet the GMP requirement?

Eppendorf offers global certification services which comply with FDA 21 CFR Part 11, EU GMP Annex 11, GLP and GAMP ® 5 to ensure a consistent, standardized operation. We also enable an uncomplicated validation from the implementation to the shutdown by providing support for the installation und operational qualifications (IQ/OQ) of the device and with the software. The entire qualification is documented in detail and the operator’s personnel is qualified and certified in intensive training sessions.

Why should I have my ep Motion serviced at regular intervals?

To ensure the optimum performance and precision of your device. This also enables the early detection of any defects which can then be corrected easily. Only precise and accurate devices ensure successful liquid transfers!

Why can the dispending tool be calibrated without the user unit ?

The ep Motion dispensing tool is calibrated with the help of the ep Motion Tool Holder. The electronic parameter to control the tools of the ep Motion are always the same in all ep Motion units. Therefore all ep Motion dispensing tool can be calibrated on different units than the user unit. The only exceptions are the TS10 and TM10 dispensing tool. They can only be calibrated with units controlled by epBlue Version 40.5.

How often does the OQ need to be carried out for an ep Motion ?

The company is responsible for technical checks of devices. Eppendorf recommends regular device qualifications depending on the intensity of use, however, they should be carried out at least once a year.

text.skipToContent text.skipToNavigation

JP | JPY

結果がありません

検索の提案

製品群

Show all Product Families ()

商品番号

Show all Articles ()

コンテンツ

Show all Content ()

epMotion^® 96 と96xl

epMotion 96 is an ideal device to fill multiple plates fast

epMotion 96 with stack of cell plates pipetting media accurately

epMotion 96 is a useful tool to assist plate assays on other liquid handling workstations

A precisely shaped pipetting head is needed for optimal tip fit and accurate pipetting

Intuitive operation: Insert tips for required volume range; select mode of action; move plate to tips; touch for aspirate or dispense

epMotion 96 iPod software with convenient touch control, usable with gloves, intuitive and industry proven software concept

Fast and easy positioning of labware via adjustable lifting table

Semi-automated electronic pipette for 96-well format

Nine different pipetting modes are available and entry of parameters is very intuitive

Convenient pipette mode selection vie free epMotion 96 App for iPod touch and iPhone

epMotion 96 allows to multidispense in a stack of plates on the lifting table for fast operation

semi-automated electronic pipette for parallel 96 channel microplate processing (without iPod® controller)

Multiple positions increase the capacity of 96-channel pipettors

Possibility to pre-set labware heights in 2 positions for repetitive tasks or auto-pipetting mode

製品情報

生産性を向上し、すぐに96ウェルプレート全体をピペッティングします。l 迅速に正確にします。
epMotion 96は、手動マルチチャンネルピペッティングの限度を克服します。細胞による分析、ELISA、細胞播種、核酸定量からの結果により良い再現性が得られるので、時間とお金の節約になります。

製品情報をもっと見る

Eppendorf Advantage：今すぐお得な情報を見る!

追加でダウンロードできる材料がありますこのページの最後に

製品情報

テクニカルデータ

アプリケーション

特徴

Eppendorf のepMotion 96は、迅速で再現性の高いマイクロタイタープレート並列処理が行えるセミオートマティックの96ウェルマルチチャンネルピペットです。この使いやすいベンチトッリキッドハンドリングロボットでは、96および384 ウェルプレートで再現性の高いピペッティングを行うことができます。このシステムは変更せずにそのままで、0.5 µL～300 µLと幅広い容量範囲に対応し、広範囲のアプリケーションに便利に使用できます。その人間工学に基づいたデザインと直観的な操作性により、epMotion 96は、96 フォーマットでの迅速で再現性の高いリキッドハンドリングを実験室で行わなくてはならない場合に強い味方となります。
直感的な操作
• ソフトウェア：Eppendorf Xplorer^®電子ピペット利用
• インテリジェントなプリセットアプリケーション：吸引、希釈、連続分注、マルチディスペンシング
• 現在の液体等級に合致する吸引や分注速度用のパラメータを個別に設定できます
• 頻繁に使用する容量を保存しプログラミングが迅速にできます
• 複雑な用途での多段階滴定業務をプログラム

96ウェルの同時滴定

• プレートを8 や 12チャネルピペットより迅速かつ再現性に優れる充填
• 電動ピペッティングと並列ピストン運動による結果精度アップ
• インデキシングで384ウェルプレートへのピペッティングが可能 4 ｘ 96チャンネル
• Random error <3 % at 1 µL
• Systematic error <2 % at 1 µL

使い易さ

• 0.5～300 µL滴定に１つのシステムで対応しかもピペットヘッド交換不要
• ノーズサイズの自動検出機能
• 50 µLか300 µL ノーズの使用が可能で確度を最大限にします
• ラミナーフローフード下に決まるコンパクトなデザイン

人間工学

• 業界で実証された直観的なソフトウェアコンセプト
• 便利なタッチスクリーン
• チップの簡単ですばやいロードおよびリロード
• 反復ストレス負傷(RSI)のリスク軽減

読む量をもっと少なくする

仕様	epMotion^® 96 - 5069000004	epMotion^® 962ポジションスライダー付き - 5069000101	epMotion^® 96xl - 5069000209	epMotion^® 96xl2ポジションスライダー付き - 5069000306

ピペッティングタイプ	エアクッションシステム	エアクッションシステム	エアクッションシステム	エアクッションシステム
チャネル数	96-チャネル	96-チャネル	96-チャネル	96-チャネル
アプリケーション	細胞培養、分子生物学	細胞培養、分子生物学	細胞培養、分子生物学	細胞培養、分子生物学
容量レベル	0.5 – 300 µL	0.5 – 300 µL	5 – 1,000 µL	5 – 1,000 µL
動作モード	電動デンドウ	電動デンドウ	電動デンドウ	電動デンドウ
オートクレーブ可能	いいえ	いいえ	いいえ	いいえ
電源	100 – 240 V, 50 – 60 Hz	100 – 240 V ±10 %, 50 – 60 Hz ±5 %	100 – 240 V, 50 – 60 Hz	100 – 240 V ±10 %, 50 – 60 Hz ±5 %
Consumables	epT.I.P.S.^® motionリロードシステム	epT.I.P.S.^® motionリロードシステム	epT.I.P.S.^® motionリロードシステム	epT.I.P.S.^® motionリロードシステム
最大電力消費	175 W	175 W	175 W	175 W
寸法（W × D × H）	22.9 × 45.7 × 53.3 cm / 9 × 18 × 21 in	22.9 × 45.7 × 53.3 cm / 9 × 18 × 21 in	22.9 × 45.7 × 57.6 cm / 9 × 18 × 21 in	22.9 × 45.7 × 57.6 cm / 9 × 18 × 23 in
製品の重量	19 kg / 42 lb	20 kg / 44 lb	20 kg / 44 lb	21 kg / 46 lb
SLAS/ANSI 箇所	1	−	−	2

分注ツール
ランダム測定誤差 (1 µL)	≤3 %	≤3 %	−	−
系統測定誤差 (1 µL)	±2 %	±2 %	−	−
ランダム測定誤差(5 µL)	≤3 %	≤3 %	≤3 %	≤3 %
系統測定誤差(5 µL)	±2 %	±2 %	±2 %	±2 %
ランダム測定誤差(10 µL)	−	−	≤3 %	≤3 %
系統測定誤差(10 µL)	−	−	±2 %	±2 %

ダウンロード: epMotion^® 96 と96xl

ブロシュア

96 Well? Done!

Eppendorf epMotion^® 96 — semi-automated electronic pipette for fast and precise 96 channel microplate processing

Improve the precision and reproducibility of your PCR setup and normalization

PDF 4.0MB

英語

同時にご考慮下さい。

Eppendorf ThermoMixer^® C

Eppendorf ThermoMixer Cは、試料を加熱、冷却、混合して、インキュベーションステップを実行できます。異なる容器形式用の専用の交換可能なSmartBlocksが柔軟性を提供します。

Eppendorf Xplorer® / Xplorer plus single- and multi-channel electronic pipettes

Eppendorf Xplorer^®/ Eppendorf Xplorer^® plus

多種多様な用途向けの電子式エアクッションピペット。簡単、迅速、正確なピペッティングを可能にする、直観的に調整できるパラメータ。

Eppendorf Deepwell Plates

ハイクオリティ、優れたパフォーマンスEppendorf Deepwell Plates.

Evenly shaped PCR plates for reliable heat transfer

Eppendorf twin.tec^® PCR Plates

ツインテクノロジーの高品質PCRプレート。剛性の高いPCフレームを備えた薄壁PPウェルは、反ることなく最適な熱伝達を可能にし、非常に自動化されています。異なるフォーマットを利用できます。

Eppendorf Microplate with OptiTrack® matrix

Eppendorf Microplates

Eppendorf Microplateで無類の透明性

Webinar: Liquid Handling for NGS Workflows

Generating high-quality NGS libraries is a labor-intensive process that requires experience, precision, and accuracy. In this webinar, you will learn:

The basics of NGS workflows & expert advice on getting started with NGS in your lab

Practical tips and tricks for manual and automated liquid handling

How Eppendorf epMotion can help you achieve reliable and reproducible sequencing results

Learn more

セッションはまもなく終了します

分

秒

epMotion^® 96 と96xl

製品情報

製品情報

テクニカルデータ

アプリケーション