Can cell culture plates be used in the SmartBlock plates?

Also cell cultuture plates can be used in the SmartBlock plates in so far the dimensions of the plate comply to the SBS standard.

Which cleaning and disinfection agents can be recommended for cleaning and disinfection of ThermoMixer C, ThermoMixer F and ThermoStat C?

Switch off the device, disconnect the mains/power plug and make sure that no liquid can get into the inside of the housing. When cleaning has been completed, the device should only be connected when it is fully dry on the inside and on the outside. Use lint-free cloth and soft bottle brush or cotton swabs for SmartBlocks and SmartExtender. Do not use any aggressive chemicals on the device or its accessories such as strong and weak bases, strong acids, acetone, formaldehyde, halogenated hydrocarbons or phenol. If the device is contaminated with aggressive chemicals, clean it immediately using a mild cleaning agent and wipe it off with dist. water afterwards. Recommended cleaning agents: mild, soap-based lab cleaner dist. water Recommended disinfectants: ethanol (70%) isopropanol (70%) Please follow the detailed safety instructions in the Operating Manual.

Which DNA and RNAse deconatmination agents can be recommended for decontamination of the devices and the SmartBlocks?

We tested DNA away and RNase away and we can recommend to use both agents.

How can the temperature accuracy be verified?

The best possible temperature accuracy can be guaranteed by individually adjusting a SmartBlock. Optimized temperature control for each block type keeps temperature overshoots and deviations caused by external interferences to a minimum. To guarantee optimal performance over the entire period of use, Eppendorf offers a preventive maintenance program and certification services: your Eppendorf ThermoMixers, ThermoStat C as well as the SmartBlocks are regularly cleaned, checked and adjusted. Additional information is available at: https://www.eppendorf.com/epservices . Customers can also verify the temperature accuracy by themself. Eppendorf provides for that purpose the Temperature Verification System – Single Well for Eppendorf Mastercyclers (0056 000.003) in combination with the 384 well Sensor (0056 002.006).

Which SmartBlocks and vessels can be used with ThermoMixers F?

The ThermoMixers F possess a fix installed SmartBlock and can only be used with the appropriate microtest tubes or plates, such as MTP’s, DWP’s or skirted plates complying the SBS standard. For using PCR plates our SmartBlocks PCR 96 and PCR 384 in combination with ThermoMixer C is the proper choice.

What does the term 2DMix-Control technology describe/stand for?

2DMix-Control technology describes the ability of the MixMate, ThermoMixer C and ThermoMixers F to mix small sample volumes in various plate and tube formats quickly and in a controlled manner. To achieve this, the interplay of all crucial factors for efficient and controlled mixing, have been optimized. And these are: - Generation of sufficient mixing energy: due to an orbital mixing movement at a high mixing speed and a relatively large mixing radius (1.5 mm) the devices generate enough mixing energy (analogous to g-force in centrifuges) to mix even the smallest volumes efficiently. - Minimized loss of mixing energy: special attention was paid to reducing inherent vibration. Smooth operation combined with reliable stability ensures that all the mixing energy is available for mixing and not wasted through transmission of vibrations to the device or its surroundings. - Controlled transmission of energy from the device to the sample: Minimizing vertical movements enable a plane, 2-dimensional (2D) mixing stroke. This, in conjunction with the reliable plate and tube holders and SmartBlocks, prevents uncontrolled chaotic movements and allows all formats to be held securely, even at high mixing frequencies.

Is the housing of ThermoMixer C, ThermoMixer F and ThermoStat C stable against UV irradiation?

A disinfection by UV irradiation cannot be recommended, because discoloration of the housing materials can occur.

Can PCR plates be used in SmartBlock plates respectively ThermoMixer FP?

SmartBlock plates and ThermoMixer FP (with the fixed SmartBlock plates) are dedicated for using MTP’s, DWP’s and also other skirted plates which meet the SBS standard. For optimal usage of PCR plates the SmartBlock PCR 96 and PCR 384 in combination with ThermoMixer C or ThermoStat C is the proper choice. These SmartBlocks possess conical bores which surround the conical wells of PCR plates properly for a perfect temperature transition.

Are start and end position of the SmartBlocks the same?

No. Start and end position are not identical.

Why should I have my ThermoMixer serviced at regular intervals?

Eppendorf Performance Plans offer a selection of preventive maintenance services which ensure a consistent performance of the device and confidence in the results.

How often does my ThermoMixer need to be serviced?

This depends on how intensively it is used and varies depending on the load on the device. However, we recommend to have it serviced at least once a year.

Please contact your local Eppendorf Service Team. You find the contact data on our homepage or in the information materials.

What types of training or online training do you offer to enable me to improve my skills?

Please visit the Eppendorf webpage about the Eppendorf Training Center or contact your local Eppendorf Service for further information and a quotation.

What does the temperature verification include and how often does it need to be carried out?

To ensure that your ThermoMixer delivers reproducible and correct results, temperature verification and adjustment - if required - are strongly recommended. Temperature verification is a very accurate and precise method and complies with all laboratory requirements with regard to documentation and detection in accordance with national and international standards.

What is IQ or OQ and what do I need them for?

Installation and operational qualification; the IQ documents that the device has been delivered and installed correctly. The OQ checks the correct functioning of a device. IQ/OQ ensure that your quality management requirements are met and that your device operates properly and in accordance with the manufacturer’s specifications.

How often does the OQ need to be carried out for a ThermoMixer?

The company is responsible for technical checks of devices. Eppendorf recommends regular device qualifications depending on the intensity of use, however, they should be carried out at least once a year.

How can my device be cleaned and which cleaning agents and disinfectants can be used for cleaning and disinfection of ThermoMixer C, ThermoMixer F and ThermoStat C?

Switch off the device, disconnect the mains/power plug and make sure that no liquid can get into the inside of the housing. When cleaning has been completed, the device should only be connected when it is fully dry on the inside and on the outside. Do not use any aggressive chemicals on the device or its accessories such as strong and weak bases, strong acids, acetone, formaldehyde, halogenated hydrocarbons or phenol. If the device is contaminated with aggressive chemicals, clean it immediately using a mild cleaning agent. Use a lint-free cloth and a mild, soapy laboratory cleaner and distilled water. Clean the housing and the thermoblock regularly. Please refer to your operating manual for further information - Maintenance chapter

What do you need to look out for before carrying out a service?

The device needs to be decontaminated first. The device must be freely accessible and all samples removed from the device. You should also ensure that the device has cooled down already.

What types of service programs are available for the ThermoMixer?

各器機に提供されているサービスプログラムは、サービス＆サポート/メンテナンスおよび証明書サービスセクションにあります。

How can temperature accuracy be verified?

The best temperature accuracy possible is ensured by the individual adjustment of each SmartBlock. The Eppendorf Temperature Verification System- Single Channel is used to check the temperature accuracy of the thermoblock. In combination with the temperature sensor for the Eppendorf ThermoMixer, the exact temperature in the thermoblock can be measured. You can find further information in the corresponding operating manual.

Is it possible to use the Eppendorf Thermomixer for 24 h and at 7 days?

Yes, this is possible. The customer has just to set the time to endless.

What are the costs for the different ThermoMixer service programs?

The cost depends on the model and on the service that is performed. Please contact your local Eppendorf Service.

text.skipToContent text.skipToNavigation

JP | JPY

結果がありません

検索の提案

製品群

Show all Product Families ()

商品番号

Show all Articles ()

コンテンツ

Show all Content ()

Eppendorf ThermoMixer^® F

Eppendorf ThermoMixer_F1.5 for mixing of 1.5 mL vessels

Eppendorf ThermoMixer F2.0 with vessels for convenient sample handling

Eppendorf ThermoMixer_FP for handling plates

Eppendorf ThermoMixer®_F1.5 with ThermoTop aside

Eppendorf ThermoMixer_F0.5 with_ThermoTop

製品情報

多くの日常的な混合と加熱を行っていますか？
これらの製品は、日常的なアプリケーションで混合、加熱する場合に最適です。EppendorfThermoMixer F0.5/F1.5/F2.0およびFPは、0.5/1.5/2.0 mL チュープとプレート用にそれぞれ固定ブロックがあります。加熱カバーEppendorf ThermoTop（オプション）を使用すると、小さい容器での凝縮液形成を信頼性高く防止できます。

製品情報をもっと見る

持続可能性にするEppendorfの取り組みについて（持続可能なサーモミキサー装置を識別する方法を含む）

デモの依頼

追加でダウンロードできる材料がありますこのページの最後に

製品 (4)

Services (9)

アクセサリー (3)

VisioNize (1)

4 製品

Eppendorf ThermoMixer^® F1.5

24 個のマイクロチューブ用サーモブロック1.5 mL付き
100 – 130 V/50 – 60 Hz (US/JP/South America/TW)

製品のさらなる情報

数量

在庫確認してください

カタログ番号 5384000020

希望小売価格

¥ 461,000

税込価格

¥ 507,100

お問い合わせ

Eppendorf ThermoMixer^® FP

MicroplateおよびDeepwell Plate用サーモブロック付属、リッド付き
100 – 130 V/50 – 60 Hz (US/JP/South America/TW)

製品のさらなる情報

数量

在庫確認してください

カタログ番号 5385000024

希望小売価格

¥ 492,000

税込価格

¥ 541,200

お問い合わせ

Eppendorf ThermoMixer<sup><sup>®</sup></sup>_F0.5 for mixing of 0.5 mL vessels

Eppendorf ThermoMixer^® F0.5

24 個のマイクロチューブ用サーモブロック0.5 mL付き
100 – 130 V/50 – 60 Hz (JP/South America/TW/US)

製品のさらなる情報

数量

在庫確認してください

カタログ番号 5386000028

希望小売価格

¥ 472,000

税込価格

¥ 519,200

お問い合わせ

Eppendorf ThermoMixer^® F2.0

24個のマイクロチューブ用サーモブロック2.0mL付き
100 – 130 V/50 – 60 Hz (JP/South America/TW/US)

製品のさらなる情報

数量

在庫確認してください

カタログ番号 5387000021

希望小売価格

¥ 461,000

税込価格

¥ 507,100

お問い合わせ

製品をもっと見せる

お客様のショッピングカートに追加されました。

製品情報

テクニカルデータ

アプリケーション

特徴

試料調製ルーチンを行いますか? 日常的にお使いになる容器が0.5/1.5/2.0 mLチューブであってもプレート（MTP、DWP）であっても、Eppendorf ThermoMixer F製品系列はあなたのアプリケーションに対して良いソリューションを提供します。ルーチン作業負荷を簡素化できます。

不規則な混合結果に直面していますか？

信頼できる試料混合は、特にマイクロリットル量について話す場合、単純な混合をはるかに超えています。ミキシングデバイスを何十年も提供してきた後、信頼性の高い混合性能をマイクロリットルスケールに拡張する方法を見つけました：

^2DMix–Control

^2DMix–Controlテクノロジーは液体を制御された回転動作で混合します。直径3 mm、最大3,000 rpmの連続軌道円形パス：困難な試料でも、優れた混合性能を発揮します。 ThermoMixerには、ほとんどの困難な混合作業に対応できるだけの十分な混合パワーがあります。ほとんどの試料は、容器の形状や試料の特性に関係なく、1分以内で効果的にミキシングすることができます。

チューブ内の結露に飽き飽きしていませんか?

Eppendorf ThermoMixerを加熱リッドのPCRサイクラーアプローチと組み合わせEppendorf ThermoTop^®を開発しました。抜群なEppendorf condens.protect技術がチューブリッド内での結露を確実に防止します試料濃度は培養時間中一定しています。
さらに、温度均一性が改善されました。最適な結果を生み出せる最適な試料反応条件。

• 安全なサンプル加熱のためのチューブ蓋の効率的で信頼性の高い結露防止
• サンプル内で最適な酵素性能を得るために一定の反応条件を取得します
• 自動検出・操作との無線接続で取扱い易い

37°Cか95°Cで培養するための二次温度がEppendorf ThermoMixerで利用できないでいまらっしゃいますか?

Eppendorf SmartExtenderは快適な培養ツールを提供し、使い易い既設Eppendorf SmartBlocksやEppendorf ThermoMixer C/ FxさらにEppendorf ThermoStat Cへのアドオンとしてご利用になれます。最大12個の容器(1.5mL)を加熱して処理能力を高めるとともにラボの融通性がさらによくなります。二次温度用独立加熱機能ならEppendorf SmartBlockとSmartExtenderの並列使用が可能です。中央のEppendorf SmartBlockを加熱、混合用にも使用できます。

紙ベースの文書と格闘していますか？

eLabJournal Electronic Lab Notebookは、Eppendorf ThermoMixerが含まれるワークフロープロセスのように、研究を文書化し、研究データを追跡するための直感的で柔軟なソリューションを提供します。収集されたデータの文書化、整理、検索およびアーカイブの効率を向上させます。無償のeLabJournalアドオンで、eLabJournalの機能を完全統合型Laboratory Information Management Systemに拡張できます。

30日間無料トライアルを始めましょう！
www.eLabJournal.comをご参照ください

効率的なラボとVisioNize^® Lab Suiteによる装置管理

ラボ装置の監視や通知の受信（アラーム装置のためなど）に関心がありますか？デジタル接続されたラボは、さらに多くの事を提供します。

モジュール式バンドルソフトウェアサービスにアクセスし、ラボに適したものを選択します。VisioNize Lab Suiteは、お客様がラボ管理者や科学者として、試料のセキュリティ、コンプライアンスのニーズ、メンテナンス管理のためのラボのデジタル管理を開始するために必要なものすべてを提供します。

デジタルラボの卓越性を実現するための独自のコースを作成しましょう！詳細

読む量をもっと少なくする

仕様	Eppendorf ThermoMixer^® F1.5	Eppendorf ThermoMixer^® FP	Eppendorf ThermoMixer^® F0.5	Eppendorf ThermoMixer^® F2.0

製品タイプ	ThermoMixer	ThermoMixer	ThermoMixer	ThermoMixer
インターフェース	USBインターフェース	USBインターフェース	USBインターフェース	USBインターフェース
電源	100 – 130 V, 50 – 60 Hz	100 – 130 V, 50 – 60 Hz	100 – 130 V, 50 – 60 Hz	100 – 130 V, 50 – 60 Hz
最大電力消費	200 W	200 W	200 W	200 W
寸法（W × D × H）	20.6 × 30.4 × 17.0 cm / 8.1 × 11.9 × 6.7 in	20.6 × 30.4 × 16.4 cm / 8.1 × 11.9 × 6.4 in	20.6 × 30.4 × 16.3 cm / 8.1 × 1.9 × 6.4 in	20.6 × 30.4 × 17.0 cm / 8.1 × 11.9 × 6.7 in
製品の重量	6.3 kg / 13.9 lb	6.1 kg / 13.4 lb	6.2 kg / 13.6 lb	6.3 kg / 13.9 lb
最大速度	1,500 rpm	2,000 rpm	2,000 rpm	1,500 rpm
温度範囲	最小：RT以上4 °C、最大：100 °C	最小：RT以上4 °C、最大：100 °C	最小：RT以上4 °C、最大：100 °C	最小：RT以上4 °C、最大：100 °C
攪拌頻度	300 – 1,500 rpm	300 – 2,000 rpm	300 – 2,000 rpm	300 – 1,500 rpm
ミキシングおよびボルテックス半径	1.5 mm	1.5 mm	1.5 mm	1.5 mm
温度設定	1℃/100℃	1℃/100℃	1℃/100℃	1℃/100℃
ミキシング軌道	3 mm	3 mm	3 mm	3 mm
温度精度	最大 ±0.5 ºC、20 – 45 ºC	最大 ±0.5 ºC、20 – 45 ºC	最大 ±0.5 ºC、20 – 45 ºC	最大 ±0.5 ºC、20 – 45 ºC

Eppendorf ThermoMixer^®
加熱速度	最大 11 °C/min	最大 18 °C/min	最大 15 °C/min	最大 13 °C/min