What are the reasons for using single-use plasticware in the laboratory?

Contamination and cross-over can only be avoided by using single-use plastic items. In addition, there is no annoying and time-consuming cleaning of glassware.

How are Eppendorf pipette tips tinted?

Organic, heavy-metal-free dyes (PP granulate) are used to tint the pipette tips.

Is a reload available for the 5 mL epTIPS Box?

No, the 5 mL epTIPS Box will be filled with epTIPS Standard.

Do Eppendorf pipette tips contain heavy metals?

The potential release of trace metal ions from the epTIPS under extreme conditions was measured by an independent and certified laboratory. The certificate that provides exact concentration per metal is provided as a pdf on our certificates homepage .

Are Eppendorf pipette tips free of silicone / silicone oil?

Neither silicone nor silicone oil is added during the production process of epT.I.P.S. pipette tips.

Up to which temperature can solutions be dispensed with epTIPS?

The epTIPS made of PP are suitable for liquids with a temperature of max. 90°C. Please take into account that the pipetting error rises due to evaporation into and warming of the air cushion.

To destroy prions, an autoclave step at 136 °C and 3 atm must be carried out. Can the epTIPS Box (or epTIPS Rack Biopur) withstand this?

No, the epTIPS Box or the epTIPS Rack Biopur cannot be autoclaved at 136 °C.

Are the epTIPS Biopur suitable for safe use in the food industry within Europe?

All Biopur products are manufactured fully automatically under cleanroom conditions. This eliminates contamination of the disposables through contact with people. Beta radiation is used as the sterilization method. An independent laboratory checks that each individual batch is free of pyrogens. The epTIPS Biopur are suitable for use in the food industry according to the Food and Consumer Goods Legislation § 5, paragraph 1 no. 1 (food and consumer goods). Please note: The suitability of a consumer item for the intended purpose, the influence of the filler on taste and smell, and the compliance with limitations (e.g. global migration, specific limitations and other analytical specifications) should be tested by the manufacturer or user for individual cases.

Are Eppendorf products free of RNA?

All products certified with "PCR clean" are tested free of human DNA, DNase, RNase and PCR inhibitors. The following applies from our point of view: Where no human DNA is detected, there can also be no RNA, which is considerably more unstable.

What is the meaning of the PCR Clean seal?

For molecular-biological requirements Eppendorf offers a new standard for uniform purity specifications. All consumables marked with the "Certified PCR Clean” label are guaranteed free of human DNA, DNase, RNase and PCR inhibitors.

How do you make your Biopur products free of pyrogens?

All Biopur products are manufactured fully automatically under cleanroom conditions. This eliminates contamination of the disposables through contact with people. An independent laboratory checks that each individual batch is free of pyrogens.Additionally the products are sterilized by radiation or treatment with ethylene oxide.

What is the shelf life of Eppendorf Biopur products?

If the Biopur products are stored according to the information in the instruction manual they have a shelf life of 5 years. The minimum expiry date is printed on the label of the box.

Why are there double labels on the folding boxes, as "PCR clean" + "Sterile" or "PCR clean" + "Protein-free"?

Due to the modularization of purity grades, some products are labeled with more than one purity grade symbol. For example, the epDualfilter T.I.P.S. has the double seal "PCR clean "+ "Sterile" and the UVette the double seal "PCR clean" + "Protein-free" on the packing. The certification remains unaffected by the modularization.

Are batch-specific certificates for the new purity grades available in the internet?

Yes, the batch-specific purity grades can be downloaded at our certificates homepage .

Can products of the previous and new modular purity grades (with new seals) be used simultaneously in one application?

Yes, if no batch attachment is required for the application, products of the old and new modular purity grades can be used, as their specifications are the same.

Are the epT.I.P.S. Box / epT.I.P.S. Box 2.0 and the epT.I.P.S. Racks UV-resistant?

The UV stability of epT.I.P.S. box / epT.I.P.S. Box 2.0 (made of polycarbonate) as well as of the epT.I.P.S. racks (made of polypropylene) were tested intensively during development. Boxes and racks were exposed to 254 nm UV light (1 J/cm2) for 16.7 hours. After 10 cycles (167 hours), no signs of adverse effects were detectable. Because the energy of the lamp used is considerably higher than that of a lamp used in a sterile bench, it can be assumed that both boxes can be exposed to UV radiation for at least 300 to 600 hours in a sterile bench without problems. Polypropylene used for epTIPS Racks is three times more resistant against UV radiation than polycarbonate allowing even longer exposure to UV light. If a disinfectant is applied prior to UV irradiation make sure to take off the reagent by wiping off using a cloth soaked in water.

Is the epTIPS Box or are the epTIPS Racks UV-resistant?

The UV stability of epTIPS boxes (made of polycarbonate) and epTIPS racks (made of polypropylene) were tested intensively during development. Boxes and racks were exposed to 254 nm UV light (1 J/cm2) for 16.7 hours. After 10 cycles (167 hours), no signs of adverse effects were detectable. Because the energy of the lamp used is considerably higher than that of a lamp used in a sterile bench, it can be assumed that both boxes can be exposed to UV radiation for at least 300 to 600 hours in a sterile bench without problems. Polypropylene used for epTIPS Racks is three times more resistant against UV radiation than polycarbonate allowing even longer exposure to UV light.

Must the lid on epT.I.P.S. Boxes / epT.I.P.S. Boxes 2.0 be opened for autoclaving?

No, the boxes can be autoclaved with the lid closed.

What are the dimensions of the epTIPS standard?

0,1-10 µL: length: 34 mm, diameter work cone: 6 mm, diameter opening: 0,35 mm 0,1-20 µL: length: 40,5 mm, diameter work cone: 6 mm, diameter opening: 0,36 mm 0,5-20 µL: length: 45,7 mm, diameter work cone: 6 mm, diameter opening: 0,37 mm 2-200 µL: length: 52,7 mm, diameter work cone: 7 mm, diameter Öffnung: 0,52 mm 20-300 µL: length: 55 mm, diameter work cone: 7 mm, diameter opening: 0,6 mm 100-1000 µL: length: 70,72 mm, diameter work cone: 8,8 mm, diameter opening: 0,83 mm 1250 µL: length: 75,5 mm, diameter work cone: 8,8 mm, diameter opening: 1,0 mm 2,5 mL: length: 115 mm, diameter work cone: 12 mm, diameter opening: 1,32 mm 5 mL: length: 120,3 mm, diameter work cone: 15,5 mm, diameter opening: 1,65 mm

Must the lid on epTIPS Boxes be opened for autoclaving?

No, the boxes can be autoclaved with the lid closed.

How often can the epTIPS Boxes be autoclaved?

The box can be autoclaved up to 100 times, the reloads up to 5 times.

Can the racks, in which the epTIPS Biopur are packed be autoclaved?

Yes, up to ten times. Since Filtertips (which may not be autoclaved) are also packed in these racks the autoclavability is not noted in the catalogue.

Can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved at 133 °C?

No, the epT.I.P.S. Box / epT.I.P.S. Box 2.0 cannot be autoclaved at 133 °C. We recommend 121 °C.

Are the polypropylene pipette tips UV-resistant?

Yes. Use on a sterile bench, for example, is safe.

Can the epTIPS Boxes be autoclaved at 133 °C?

No, the epTIPS Box cannot be autoclaved at 133 °C. We recommend 121 °C.

Is the epT.I.P.S. Box 2.0 compatible with the Reloads for the forerunner epT.I.P.S. Box?

Yes, the epT.I.P.S. ® Box 2.0 is compatible with all epT.I.P.S. Reloads and all epT.I.P.S. BioBased Reloads.

What is the difference between epT.I.P.S. Box / epT.I.P.S. Box 2.0 and epT.I.P.S. Rack?

The epT.I.P.S. ® Box 2.0 in the new design, equipped with additional benefits, is the successor product of the epT.I.P.S. ® Box used in the market since 2002. Like its predecessor, the epT.I.P.S. Box 2.0 can be autoclaved up to 100 times and can be filled with all epT.I.P.S. Reload variants for pipette tips in Eppendorf Quality, PCR clean, Biopur ® and PCR clean/Sterile. Please note: the reload variants for tips in Biopur ® and PCR clean/Sterile can only be used in the epT.I.P.S. ® Box 2.0. They do not fit into the predecessor epT.I.P.S. Box. The epT.I.P.S. ® Racks are disposable and destined only for single use and are available in the purity grades Biopur ® and PCR clean/Sterile. For detailed information visit: www.eppendorf.com/discover/the-magician-eptipsr-boxes-20

How often can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved?

Both boxes can be autoclaved up to 100 times. Stacking of many boxes should be avoided during this process. Please note that if Reloads are inserted, the tray and tips can only be autoclaved once and that filtered tips cannot be autoclaved.

If epT.I.P.S. Reloads are to be autoclaved, does the film- and plastic-packaging need to be removed?

Yes, under no circumstances should the film be autoclaved alongside the tips. Please note that stacked reloads can only be autoclaved one time, when inserted individually into the epT.I.P.S. Box or epT.I.P.S. ® Box 2.0. Reloads for pipette (filter) tips in Biopur ® or PCR clean/Sterile cannot be autoclaved.

text.skipToContent text.skipToNavigation

JP | JPY

結果がありません

検索の提案

製品群

Show all Product Families ()

商品番号

Show all Articles ()

コンテンツ

Show all Content ()

epT.I.P.S.^® - ピペットチップ

Sample being pipetted from elongated ep T.I.P.S.® to Eppendorf LoBind® deepwell plate

Eppendorf epT.I.P.S.® – available in sizes from 0.1 µL to 10 mL

Eppendorf epT.I.P.S.® work in perfect harmony with your Eppendorf pipettes

epT.I.P.S.® Standard pipette tip package: a resealable bag

epT.I.P.S.® macro volume tips facilitate easy reach to the bottom of e.g. 15 mL centrifugation tubes or flasks

epT.I.P.S.® pipette tips Box 2.0 from Eppendorf

Pre-sterilized epT.I.P.S.® and ep Dualfilter T.I.P.S.® pipett tip variants are available in Racks

epT.I.P.S.® Rack, Biopur®, 2 – 200 µL tips

製品情報

epT.I.P.S.ピペットチップはEppendorfピペットと完璧に調和して作用します！人間工学的に設計されたコーンサイズは、完全シール並びに最小限の取り付けと排出の力を可能にします。ピペットチップは、EN ISO 8655の要求を満たし、他社製のピペットモデルでも使用することができます。

製品情報をもっと見る

追加でダウンロードできる材料がありますこのページの最後に

製品情報

アプリケーション

特徴

Eppendorfピペットに完璧に適合epT.I.P.S.はお客様に信頼していただけるピペッティングシステムを確立します
(Eppendorf "Totally Integrated Pipetting System") epT.I.P.S.ピペットチップで、日々の作業を簡単にし、楽しんでください。これらのピペットチップは極めて高い品質と純度標準に作られるので、試料のすべての特殊なニーズに対応します。チップ取り付けと排出の力を完全なシールで軽減するので、epT.I.P.S. はEppendorfピペットとの完璧な組み合わせで作動し、最大の精度、正確度、再現性を提供する完全統合されたピペッティングシステムを形成します。
Eppendorf理想的な湿潤特性と最適条件の透明性を持ったピペットチップは高い純度のプラスチックだけで作られています。また、epT.I.P.S.ピペットチップは認定純度の範囲で揃っています：Eppendorf Quality、PCR clean、Sterile そして Eppendorf Biopur^®。必要なクオリティと純度のピペットチップを選んでお客様の実験のために常に再生可能な結果を得てください。ユニバーサルノーズコーンデザインはEppendorfチップに他のメーカーのピペットを使用することも可能にします。

どのようにしたら純正のEppendorfピペットチップを認識することが可能ですか？
すべてのEppendorfチップにはチップの冠の端にドロップ型レリーフエレメントの「リング」があります。

信頼できる試料には長さが延長されます：epT.I.P.S. Lピペットチップ
延長ピペットチップ - epT.I.P.S. L - これによって、コニカルチューブ、高い試料ボトル、狭くて深い容器、細胞培養フラスコやディープウェルプレートからピペッティングをする時、またはそれらへピペッティングする時、試料に確かに達することができます。これらの延長ピペットチップの長くてスリムな設計はチューブやウェルのサイドに触れるリスクを軽減するので、試料に自由にアクセスできます。ピペッティング中の交差汚染を最小限に軽減することができます。epT.I.P.S. Lは、次の容量で使用可能です：0.5 ～ 20 µL、50 ～ 1,250 µL、0.2 ～ 5 mLそして0.5 ～ 10 mL。

epT.I.P.S.ピペットチップとそのパッケージング材料の廃棄

材料のリサイクルは日々ますます重要になっています。例えば、ヨーロッパでは厚紙材のほとんど100 %がすでに再利用されています。epT.I.P.S.の梱包材はほとんどが厚紙ですが、さまざまな材料で出来ています。
Eppendorf消耗品とepT.I.P.S.ピペットチップは、少なくとも37 % のリサイクリングされた厚紙で出来ている輸送用段ボールと少なくとも60 %リサイクリングされた厚紙で出来ている折畳み箱の両方に梱包されて輸送されます。
チューブの厚紙梱包材を収集することによって貴重な原料をリサイクルするグローバルな持続可能性イニシアチブをサポートしてください。お客様の組織や地域の指定された収集コンテナ内に梱包材を使い捨てます。epT.I.P.S. Standard用のポリエチレン（PE)で出来ているラッピングホイルに関しては、 PE材をリサイクルすることができる専用のリサイクリングパートナーを選択することを推奨します。地元の廃棄物運搬業者または施設管理チームに連絡して、組織で利用可能なリサイクルオプションを理解することをお勧めします。
使用後は、チップ自体は汚染される可能性があるものとして定義されます。この汚染は生物災害、薬害、または原子力災害に基づくことがあります。従って、これらのチップのリサイクルは困難なことがあります。多くの国々でクリティカルな廃棄物は法規に従って焼却される必要があります。しかしながら、エネルギーおよび熱は汚染されたラボ消耗品を熱によってリサイクルすることによって回収することができます。
クリティカルなプラスチック廃棄物の量を軽減するためには少なくとも二つの廃棄物コンテナを使用する必要があります：クリティカルな廃棄物用に一つ、そして非クリティカルな廃棄物用に一つです。これらの二つのグループの定義は地域の規程によることがあるので、それに従ってお客様のラボで連絡・研修を受けてください。その他の地域の破棄物リサイクルオプションについてはお客様の地域の生物安全性担当者および地域廃棄物管理にお問い合わせください
公認地域リサイクリングパートナーを是非お勧めします。「ローカルであること」を保つことは輸送の影響を減らすことになるでしょう。そしてラボ廃棄物を安全で持続可能に取り扱うために「認定された」見地を持つことが推奨されます。